Eliminating Drywall Mold

Mold on drywall is a problem that is more common that you might think. Drywall is one of the most widely used building materials in the world. It is crafted from gypsum plaster that is pressed between thick paper and dried with a kiln. It is what comprises walls and ceilings in most homes and other buildings. The first thing to do is identify whether or not your drywall has a mold problem. If you can smell a musty, mildew-like odor then it is very likely that there is mold.

Moisture is the number one cause of mold, walls can sometimes have moisture due to leaking pipes that you cannot see. You might also find ceiling mold, wood mold or other wall mold due to leaking appliances or areas with a high level of humidity. The most dangerous type of mold is toxic black mold, which can make you very sick. If you suspect this type of mold you should definitely call in the professionals to get rid of the problem. You and your family will need to stay elsewhere while the mold is being treated.

For drywall affected with mold, there is no solution other than to cut out the moldy drywall. If you are doing the job yourself, then you will want to sand and scrub wood studs that have mold on them. The areas around the affected area should be cleaned with an anti-mold solution such as bleach mixed with water, left on for about 15 minutes. After the time has elapsed, rinse the area thoroughly to remove the bleach and any traces of mold left behind. Before you install new drywall, the wet area must be dried completely.

One way to speed the process is by aiming fans at the wet area and using a dehumidifier in the area. As its name implies, a dehumidifier removes moisture from the air. Drywall mold can be a pesky problem, but it is not impossible to get rid of. If you are not the do-it-yourself type then there are professionals who can take care of things for you. You probably won't have to vacate your home if the type of mold is not toxic, even if it is a big enough problem to call in a pro. Hopefully your problem with mold and drywall can be easily taken care of with the simple steps outlined above.

 

 

Secrets to Mold Removal - Click Here

 

 

Mold Removal News:

 

IAS Announces Integration Between Autosoft DMS And SmartDealerProducts Software Suite
AUSTIN, Texas, Sept. 4, 2014 /PRNewswire/ -- IAS, a leading provider of F&I solutions to automobile dealerships, announced the completion of a certification process by Autosoft, giving SmartDealerProducts dealers the ability to integrate with the Autosoft DMS in real time, without the need for a hostile interface to the dealer's system.  The addition of integration with Autosoft gives the ...


El Nino Watch Increases the Risk of Mold Damage to Houston Properties - PR Newswire (press release)

El Nino Watch Increases the Risk of Mold Damage to Houston Properties
PR Newswire (press release)
HOUSTON, Sept. 9, 2014 /PRNewswire/ -- Heavy rainfall this winter may cause dangerous levels of mold to develop in houses vulnerable to water damage. Getting a residential mold inspection performed by a certified professional lets Houston residents .

and more »
..


Linear Mold & Engineering adds two 3D metal printers
Linear Mold & Engineering, a full-service mold design, engineering and manufacturing company incorporating both traditional mold manufacturing and 3D metal printing of end-use parts and mold components, announces the addition of two 3D metal printing systems. This addition brings the total number of 3D metal printers to nine and enhances Linear's position as a total solutions provider. Tagging ...


Georgia plant manager testifies to mildew, mold at processor linked to salmonella outbreak
A former plant manager says he saw mildew, mold and dirty equipment at a Georgia peanut processor linked to a deadly salmonella outbreak...


Post office to be converted to wine bar - Waterloo Cedar Falls Courier

Post office to be converted to wine bar
Waterloo Cedar Falls Courier
The presence of mold spores slowed work on the historic building in mid-spring, prompting the Cedar Falls Development Group to request the city rewrite its vaguely worded mold removal ordinance to accommodate the project. The mold problem, Miller said, .

and more »
..


Cimatron to Present at the Rodman & Renshaw 16th Annual Global Investment Conference in New York on September 9
GIVAT SHMUEL, Israel, August 26, 2014 /PRNewswire/ -- Cimatron Limited (NASDAQ: CIMT), a leading provider of integrated CAD/CAM software solutions for mold, tool and die makers as well as manufacturers ...


EnviroFry Recommends Mold Testing for Arizona Air Conditioners, Swamp . - PRWire (press release)

EnviroFry Recommends Mold Testing for Arizona Air Conditioners, Swamp .
PRWire (press release)
Lee Maglanoc is the Mesa-based manager for EnviroFry for Arizona, California, and Nevada. To schedule mold inspection of air conditioning equipment and ducts, as well as swamp coolers, in Arizona homes and commercial buildings, phone Mr. Maglanoc .

and more »
..


 

 

Do It Yourself Mold Removal - Click Here

 

Many, if not all of the links on this website are affiliate links which means that we will be compensated if you choose to buy at some point in the near future. Please accept our sincere thanks for your support.


Technorati Tags: , ,